External Air Connection - Airsystem - RAIS Attika Pilar Installation Manual

EXTERNAL AIR CONNECTION - AIRSYSTEM

All RAIS/ATTIKA wood-burning stoves can have an external air
connection. We call this external air supply AirSystem. The air
intake to the system can be hidden by installing it either in the
floor or in the wall behind the wood-burning stove.
AIR CONNECTION THROUGH THE FLOOR
1. P lace the foam rubber ring (5) below the wood-burning stove
and centre in the hole in the bottom of the stove.
2. T ap out the cover in the bottom of the wood-burning stove
using a hammer.
3 S tick the air valve (3) in the bottom of the wood-burning stove
using the gasket (2) between the stove and air valve.
4. F it the flexible hose (4) on the spigot in the bottom of the
combustion chamber and air valve (3), and tighten using the
hose clamps (1).
EXTERNAL AIR CONNECTION - AIRSYSTEM
5
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
E-mail: info@rais.dk - Homepage: www.rais.dk
1
4
1
3
2
Designer: Project manager: Approved:
ksj
D M Y
Corrections:
GB - 17