Gardeo GTHE510SP Original Instructions Manual page 62

STARTING AND SWITCHING OFF
Telescopic hedge cutter
1 Connect an extension lead to the hedge cutter's plug.
2 Pull the extension lead through the cable restraint and fasten it to the hook.
3 When you want to start the hedge cutter, first press the starting lock and then press the Switch.
4. When you want to turn off the cutting unit, release the switch again.
N.B.: Only use extension leads which are intended for outdoor use. Always hold the telescopic pole
with the left hand and the rear handle with the right hand.
Portable hedge cutter
1 Connect an extension lead to the hedge cutter's plug.
2 Pull the extension lead through the cable restraint and fasten it to the hook.
3 When you want to start the equipment, take hold of the front handle with one hand and
press the switch. Then, take hold of the rear handle with the other hand and first press the
starting lock followed by the switch.
4 When you want to turn the equipment off, release one of the switches again.
5 The blade brake will immediately stop the blades.
OPERATION
62