Gardeo GTHE510SP Original Instructions Manual page 60

use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
1. Blades
2. Guard
3. Front handle
4. Angle adjustment button
5. Quick release telescope coupling
6. Cable restraint
7. Switch on the rear handle
8. Locking ring for telescopic pole adjustment
Fitting the telescopic pole
1 Open the quick release telescope coupling on the telescopic pole
2 Insert the rear handle part into the bracket on the telescopic pole
3 Close the quick release coupling again
4 Open the quick release telescope coupling on the engine part
5 Insert the telescopic pole into the bracket on the casing
6 Close the quick release coupling again
DESCRIPTION PAGE 2
9.
10.
11.
12.
13.
14.
15.
16.
ASSEMBLY
Starting lock
Telescopic pole
Quick release telescope coupling
Shoulder strap
Cable
Blade guard
Switch on the front handle
Rear handle
60