Programming Measures Using The "Self-Learning" Function - La Cimbali M39 GT R2 Use And Installation

26. Programming measures using the "SELF-LEARNING" function

The water doses for coffee and the hot water doses can also
be set using the "SELF-SETTING' function:
press and hold the STOP button for at least 8 seconds
or until you hear a buzzer sound that will keep sounding
throughout the programing. The menu below will appear on
the display, showing the keys with the relative quantities for
water for the coffee.
SELF-LEARNING
Group 1
090 150
Coffee measures
coffee and insert it in the dispenser unit.
spouts and press the button to be programed. Keep
it pressed until the desired level is reached in the cup
or container.
During this phase, the setting for the volumetric dosage
pulses (top right of display) is increased. When the
key is released, the setting reached is memorized
and appears under the programmed key.
3 - Starting from step 1, continue programing, as desired,
on all the coffee buttons.
DV: 000
STOP
080 160
Hot water measures
1 - Press the button to be programed and keep it pressed
until the desired level is reached in the cup.
During this phase the time in seconds (top right of
display) is increased; when the key is released, the
setting reached is memorized and appears below the
programmed key.
SELF-LEARNING
water buttons
3.5
2 - Starting from step 1, continue programing, as desired,
on all the water buttons.
been completed.
23 EN
t: 3.5
STOP
3.5 5.0