Manual Override; Locking And Unlocking Your Zona; Advanced Settings List; Advanced Settings - emmeti Zona Operating Instructions Manual

Manual Override

Manual Override allows you to set a temperature (higher or lower) than the current room temperature by interrupting the current
programme. This new temperature will be maintained until the Manual Override is turned off.
From the main display, briefly press either
the desired temperature.
Press to confirm your selection.
To cancel Manual Override press
The ZONA will resume the previously set programme.

Locking and Unlocking your ZONA

Locking the ZONA disables all the functions of the buttons and shows the small padlock symbol in the top right of the display.
Hold & together for 3 seconds. The padlock symbol will appear, indicating that the ZONA has been locked.
Repeat these steps to unlock the ZONA.

Advanced Settings List

1. Boost Setting - Hours and Target Temperature 5-35°C
2. Holiday Setting - Days and Target Temperature 5-35°C
3. Sensor Type - 00 Inner Sensor, 01 External Sensor,
02 Inner & External Sensor, Default 00
4. High Temperature Protection - 35-90°C, Default 90°C
5. Low Temperature Protection (Frost Protection) -
0-10°C, Default 5°C
6. Swing - 1-9°C, Default 1°C
7. Temperature Calibration ADJ - ±9°C, Default 0°C

Advanced Settings

From here you can access the Advanced Settings for your ZONA. These settings will allow you to personalise the way your ZONA works.
To access the Advanced Setting Menu:
Hold & together for 3 seconds.
Use to switch between the Advanced Settings. Use
Once you have finished altering the Advanced Settings, press
ZONA Operating Instructions
or , the Manual symbol
. The Manual Override will be removed, press
&
will appear and the temperature can then be changed to
to return to the main display.
8. Highest Target Temperature - 35-90°C, Default 35°C
9. Lowest Target Temperature - 0-30°C, Default 5°C
10. Home Mode - Temperature Setting 5-25°C, Default 22°C
11. Away Mode - Temperature Setting 5-25°C, Default 15°C
12. Sleep Mode - Temperature Setting 5-25°C, Default 18°C
13. Restart Thermostat / Reset Thermostat -
a. Screen shows '
b. Press or
c. Wait 10 seconds or press
to make changes to the chosen Advanced Setting.
to confirm changes and return to the main display.
'
and the screen will change to '
button to confirm setting
'
5