Advertisement
CLEANING & CARE
1.
Unplug the power cord from the electrical outlet after steaming.
2.
Allow unit time to cool (at least 5 minutes).
3.
Remove all accessories from the unit.
To remove the mop head, press the side locking button (fig. 1 & 2 below):
4.
Remove Water Tank Cap and drain any remaining water from Water Tank into a
sink or tub to minimise potential mineral build-up; replace when done.
5.
Collapse Extension Pole to shortest length (if storage space is limited) and wrap
the power cord around Cord Brackets. 6. Store Multi-Purpose Steamer in a cool,
dry location, along with all attachments.
Removing Mineral Build-up
A common maintenance need for steam appliances is the removal of building-up caused by
high mineral content in many municipal water supplies. This mineral build-up may limit the
effectiveness and reduce the life of your Multi-Purpose Steamer.
The best way to minimise mineral build-up is to use distilled or de-mineralised water when
using your Multi-Purpose Steamer. Also, it is recommended that the cleaning procedure
below be followed at least once a month to remove any deposits that form. This will help to
extend the life of your Multi-Purpose Steamer and keep it functioning at its maximum
potential.
1.
Follow steps 1-4 above. However, do not replace Water Tank Cap at the end of 4.
Advertisement
