Reference Manual
00809-0600-4410
3.3.1
Pipe mount
Pipe mount
The following hardware and tools are needed to mount the Gateway to a 2-in. pipe:
•
Two 5/16-in. u-bolts (supplied with Gateway)
•
2-in. mounting pipe
•
½-in. socket-head wrench
1. Secure the u-bolt around the pole at the appropriate height you want the Gateway
2. Using a ½-in. socket-head wrench, secure the Gateway to the pole with two u-bolt
Figure 3-1: Pipe Mount
3.3.2
Bracket mount
The following hardware and tools are needed to mount the Gateway to a support bracket:
Prerequisites
•
Four 15/16-in. bolts
•
Mounting support bracket
•
⅜-in. drill
½ -in. socket-head wrench
•
Mount the Gateway using the following procedure:
Emerson 1410S/781S
to be secured.
assemblies and four 15/16-in. nuts.
Installing the Gateway
September 2020
23