Stihl SGA 85 Instruction Manual page 54

Hide thumbs Also See for SGA 85:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
English
Fault
LEDs on battery
and beeps on the
sprayer
The sprayer runtime
is too short.
Sprayer does not
pick up plant
protection product.
The spraying unit
vibrates and the
pressure gauge
oscillates.
The spray jet has
changed shape.
The plant protection
product emerges
from the sprayer in
the area of the hose
clamp.
Cover cannot be
opened.
52
Cause
There is an electrical fault. ► Remove battery and reinsert it.
The battery is not fully
charged.
The battery service life has
been exceeded.
The filter or the spraying
unit are clogged.
The pulsation damper on
the pump is not working
properly.
The nozzle is blocked.
The nozzle is worn.
The hose clamp has come
loose.
The pressure in the
container is too high.
Remedy
► Switch on the sprayer.
► Fully charge battery as described in the User
Manual for chargers STIHL AL 101, 300, 500.
► Replace battery.
► Clean filter and spray attachment.
► Switch off the sprayer and remove the battery.
► Empty container.
► Insert the battery and switch the sprayer on.
► Press trigger of spray gun for 30 seconds.
► Fill container again.
► Clean the nozzle.
► Fit a new nozzle.
► Tighten the screw of the hose clamp firmly.
► Switch off the sprayer and remove the battery.
► Press the switch lever of the spray gun to release
the pressure.
18 Troubleshooting
0458-600-9621-A

Advertisement

Table of Contents
loading

Table of Contents