Table of Contents
Advertisement
1
Image 3-12
Canvas
The rectangular canvas (1) allows the user to create an adjusting area through four control points. The four
control points are colored in red, green, cyan, and yellow. The cursor will turn to hollow when selected.
•
Click on the cursor to select it or use "W", "A", "S", and "D" on the keyboard.
•
Drag the selected point to the desired position, and use arrow keys on the keyboard to fine tune the
position.
Enable
Check to the box to enable black level settings (2).
Transparent
Set the transparent value of the adjusting area (3).
The default value is set to 2.2.
For more info, see "Black level, transparent", page 30
Palet
There are five palettes for the user to set color for the adjust area (4).
The default color is black.
Click the palette row and a color palette dialog will pop out. In the color palette dialog, select a color and click
OK.
Using the Warping and Blending tool
2
3
4
5
6
R5910890 /01
G60 W series
29
Advertisement
Table of Contents
