Barco G60 W Series User Manual page 26

Using the Warping and Blending tool
1
3
2
Image 3-9
Top
Set the top blending area of the projection screen (1).
Options Descriptions
Enable Check the box to enable top edge blending.
Start Sets the starting position of the blending area. Type in the value and press Enter on the
keyboard.
The default value is set to 0.
Width Sets the width of the blending area. Type in the value and press Enter on the keyboard.
The default value is set to 100 pixels.
Enable Marker Check the box to show the markers of the blending area.
Enable Marker, Click the box to select a color for the starting marker.
Start
The default color is black.
Enable Marker, Click the box to select a color for the ending marker. The default color is black.
End
Bottom
Set the bottom blending area of the projection screen (2).
Options Descriptions
Enable Check the box to enable bottom edge blending.
Start Sets the starting position of the blending area. Type in the value and press Enter on the
keyboard.
The default value is set to 0.
Width Sets the width of the blending area. Type in the value and press Enter on the keyboard.
The default value is set to 100 pixels.
26 R5910890 /01 G60 W series
5
4
6