Barco G60 W Series User Manual page 27

Options Descriptions
Enable Marker Check the box to show the markers of the blending area.
Enable Marker, Click the box to select a color for the starting marker.
Start
The default color is black.
Enable Marker, Click the box to select a color for the ending marker. The default color is black.
End
Left
Set the left blending area of the projection screen (3).
Options Descriptions
Enable Check the box to enable left edge blending.
Start Sets the starting position of the blending area. Type in the value and press Enter on the
keyboard.
The default value is set to 0.
Width Sets the width of the blending area. Type in the value and press Enter on the keyboard.
The default value is set to 100 pixels.
Enable Marker Check the box to show the markers of the blending area.
Enable Marker, Click the box to select a color for the starting marker.
Start
The default color is black.
Enable Marker, Click the box to select a color for the ending marker. The default color is black.
End
Right
Set the right blending area of the projection screen (4).
Options Descriptions
Enable Check the box to enable right edge blending.
Start Sets the starting position of the blending area. Type in the value and press Enter on the
keyboard.
The default value is set to 0.
Width Sets the width of the blending area. Type in the value and press Enter on the keyboard.
The default value is set to 100 pixels.
Enable Marker Check the box to show the markers of the blending area.
Enable Marker, Click the box to select a color for the starting marker.
Start
The default color is black.
Enable Marker, Click the box to select a color for the ending marker. The default color is black.
End
Gamma
Check the box to enable Gamma function (5) to control the gamma curve of the blending area. Type in the
value and press Enter on the keyboard to apply.
The default value is set to 2.2.
For adjacent projectors, set the same gamma value.
Using the Warping and Blending tool
R5910890 /01 G60 W series 27