Barco G60 W Series User Manual page 23

1
2
Image 3-5
Move Pitch
Drag the slider to set the number of pixels the cursor moves each time (1) or use the + and - keys on your
keyboard.
The default value is 100 pixels.
Grid number
Drag the slider to set the number of grids on the projection screen (2) or use Ctrl + and Ctrl - on the keyboard.
The default value is 3 x 3.
Coordinates
Shows the coordinate of the selected cursor (3).
Cursor
• Check the box next to Show Cursor to show the cursors on the projection screen (4).
• Click the box next to Color to select the cursor color.
Blank
Check the box to enable project black pattern (5).
Test pattern
Check the box to enable test pattern, and select color for the test pattern (6).
For more info, see "Warp settings,Test Pattern", page 24.
Using the Warping and Blending tool
3
4
5
6
7
R5910890 /01 G60 W series 23