Models With Sanitisation System - Jacuzzi hydromassage Use & Maintenance

Models with
sanitisation system
In models with sanitation system,
fill the tank with the liquid provided
for sanitising the water circuit.
We recommend the use of J-MX 07
disinfectant, suggested by Jacuzzi®,
which can be found at Jacuzzi® Service
Centres and Authorised Retail.
For maximum safety, the electronic
circuit which controls the various
functions prevents from start the
sanitation cycle when a hydromas-
sage is in progress and vice versa.
J
acuzzi® tubs may be equipped with a sanitation system pre-fitted at the factory.
F
A
A
■ Operate the adjustment knobs on the face plate (A) to shut off the air: this will prevent
forming foam while the pump is running.
Also check that all the hydromassage nozzles are open.
■ To activate the sanitisation cycle, press and hold button (D) for approximately 4 sec-
onds (this stops the cycle being accidentally started).
■ The cycle will be carried out in a sequence of steps which are needed for complete,
effective sanitation:
- At start-up, the pump comes on and pumps a preset amount of J-MX 07 liquid into the
water circuit.
40
F
D
E
E
D
F
F
E
D
JACUZZI
®
by
D