Tubs with separate hot
and cold water taps
Hot water tap (1)
Cold water tap (2)
Shower head (4)
Drain control (5/5a)
N.B.: The control (5a) may be
positioned under the tub rim
It is advisable to fill the tub with
pre-mixed water (i.e. not the hot
water first and then the cold water)
at a maximum temperature of 60° to
prevent damaging the pipes and to
reduce the formation of lime scale.
Taps
O
pen the taps (1-2) to automatically fill the tub through the spout (3).
3
Spout (3)
1
Spout
A lever is provided to divert the water to the showerhead. The lever automatically re-
turns to the "tub filling" position when the taps are closed.
Before filling the tub, make sure that the lever present on the back of the spout is po-
sitioned downwards.
Then operate the knobs checking the temperature of the water.
8
4
2
2
1
5
4
3
5
2
5a