Tubs With Single-Control Mixer Tap And Extractable Showerhead - Jacuzzi hydromassage Use & Maintenance

Showerhead
Tubs with single-con-
trol mixer tap
and extractable showerhead
The diverter valve will click when the
mixer is closed and automatically
return to the "tub filling" position.
■ To remove the showerhead from its support, press the ring downwards (1) and turn it
by approximately 45° (2).
For this purpose, reposition the showerhead, press the ring and turn it by approxi-
mately 45°, until it snaps upwards (closing of the seal on the flexible hose).
3
1
45°
2
■ Various Jacuzzi® whirlpool tub models fit a single-control mixer tap provided with au-
tomatic button diverter valve (1) and showerhead (2) with flexible hose concealed under
the tub.
■ To fill the tub, lift the lever of the single-control mixer tap (3); turn the mixer lever to
adjust the required temperature.
■ The tub spout is arranged again on the tub rim but separately from the taps. The spout
is provided with an exclusive water sheet jet.
3
1
■ For using the showerhead, proceed as above and press the automatic diverter valve
button (1): the water sheet will be interrupted and water will start flowing from the show-
erhead.
■ To remove the showerhead from its support, press the ring downwards (1) and turn it
by approximately 45° (2).
For this purpose, reposition the showerhead, press the ring and turn it by approxi-
mately 45°, until it snaps upwards (closing of the seal on the flexible hose).
2
1
31
2
1
2
45°