Table of Contents
Advertisement
5.[Administration] Tab Page
Item name
1
Enable DNS
2
Enable DNS(IPv6)
3
Primary DNS Server Address
Secondary DNS Server
4
Address
5
Primary DNS Server Address
(IPv6)
Secondary DNS Server
6
Address (IPv6)
7
Host Name
8
Domain Name
Setting up SMB Session
In SMB Session, you can specify the SMB network properties to enable this equipment to access a Microsoft Windows
Network. When you enable the SMB, users can also browse the network folders. You can also specify the WINS server
address if you are using the WINS server for resolution to save files on different subnets.
1
2
Item name
1
Primary WINS Server
Select whether the DNS server is enabled or not. [Enable] is set as the default.
Select whether the DNS server is enabled or not in IPv6. [Disable] is set as the
default.
Specify the IP address of the primary DNS server when the DNS service is
enabled. Specify within the range from 0 0 0 0 to 255 255 255 255.
Specify the IP address of the secondary DNS server when the DNS service is
enabled, as you require. Specify within the range from 0 0 0 0 to 255 255 255
255.
Specify the IPv6 address of the primary DNS server when the DNS service is
enabled in IPv6. Specify within the range from 1:1:1:1:1:1:1:1 to
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff.
You cannot specify the following characters.
For multicast addresses: "FF" at the beginning. (For example, "FF00".)
For loopback addresses: "::1" at the end.
For IPv4-compatible/IPv4-mapped addresses: "::ffff:x.x.x.x" at the end (x.x.x.x
is an IPv4 Address).
Specify the IPv6 address of the secondary DNS server when the DNS service is
enabled in IPv6, as required. Specify within the range from 1:1:1:1:1:1:1:1 to
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff.
You cannot specify the following characters.
For multicast addresses: "FF" at the beginning. (For example, "FF00".)
For loopback addresses: "::1" at the end.
For IPv4-compatible/IPv4-mapped addresses: "::ffff:x.x.x.x" at the end (x.x.x.x
is an IPv4 Address).
Specify the host name.
Specify the domain name.
Specify the IP address of the primary WINS server when the WINS server is
used to provide the NetBIOS name in your local area network. Specify within
the range from 000:000:000:000 to 255:255:255:255. This option would be
more useful to access this equipment using the NetBIOS Name from a
different subnet.
Description
Description
[Setup] Item List 43
Hide quick links:
Advertisement
Table of Contents
