Version Information - Toshiba E-STUDIO2323AM Topaccess Manual

5.[Administration] Tab Page
 Setting up IPP Print
In IPP Print, you can set the IPP Print options to enable the IPP print service.
This item is not available for e-STUDIO2323AM/2823AM.
1
2
3
Item name
Enable IPP
1
2 Port Number
URL
3
 Version Information
Displays version information of your equipment.
1
2
3
Item name
1 Printer Manufacture
2 Copier Firmware Version
Copier Main ROM Version
3
58 [Setup] Item List
Enable or disable the IPP print service. [Enable] is set as the default.
If enabling the IPP, enter the IPP port number. You can enter a value in the
range from 1 to 65535. Generally the default value "631" is used. A sample URL
is as follows.
https://<IP address>:631/ipp.cgi
Display the URL for IPP printing. You cannot change the URL for IPP printing.
This URL should be set as the print port when users set up the printer driver for
IPP printing.
Displays "TOSHIBA", the manufacturer name of your equipment.
Displays the firmware version information of your equipment.
Displays the main ROM version information of your equipment.
Description
Description