Related Manuals for Daktronics MS-2113
Summary of Contents for Daktronics MS-2113
- Page 1 MS-2113 PORTABLE LED SCOREBOARD DISPLAY MANUAL P1192 DD3277683 Rev 05 03 June 2020 201 Daktronics Drive Brookings, SD 57006-5128 www.daktronics.com/support 800.325.8766...
- Page 2 Daktronics trademarks are property of Daktronics, Inc. All other trademarks are property of their respective companies.
-
Page 3: Table Of Contents
Table of Contents Introduction ���������������������������������������������������������������������������������������������������������������������������1 Important Safeguards ..........................1 Specifications Label ..........................1 Resources ..............................1 Daktronics Nomenclature ........................2 Control Console ............................2 DAK Score Control ����������������������������������������������������������������������������������������������������������������������������2 Product Safety Approval ........................2 2 Specifications ������������������������������������������������������������������������������������������������������������������������3 3 Mechanical Installation �������������������������������������������������������������������������������������������������������4 Cart Assembly ............................4 Adjusting the Cart ..........................4 Optional Equipment Installation ......................5... - Page 4 Table of Contents Replacing Batteries ..........................18 Horn ..............................19 Replacement Parts ..........................19 7 Daktronics Exchange and Repair & Return Programs ����������������������������������������������������20 Exchange Program ..........................20 Repair & Return Program ........................21 Daktronics Warranty & Limitation of Liability ...................21 A Reference Drawings �����������������������������������������������������������������������������������������������������������23 B Daktronics Warranty & Limitation of Liability ��������������������������������������������������������������������41 – ii –...
-
Page 5: Introduction
Figure 1: Specifications Label Please have the assembly number, model number, and the date manufactured on hand when calling Daktronics customer service to ensure the request is serviced as quickly as possible. Knowing the facility name and/or job number will also be helpful. -
Page 6: Daktronics Nomenclature
* Primarily used for water polo applications. DAK Score Control The MS-2113 may be controlled via the DAK Score app on a compatible mobile device. For more information about DAK Score including how to download the app and device requirements, refer to www.daktronics.com/allsportMXsupport. Refer also to the MS-2113 Radio Installation Quick Guide (DD4661729), which was shipped with this scoreboard. -
Page 7: Specifications
Specifications The table below lists all of the mechanical specifications, circuit specifications, and power requirements for the display. Scoreboard Only: 2'-10" H x 4'-4" W x 8" D (864 mm, 1.32 m, 203 mm) With Cart (minimized for transport/storage): Dimensions: Height, Width, Depth 3'-4" H x 4'-7" W x 2'-6" D (1.02 m, 1.4 m, 762 mm) With Cart (maximized for display operation): 5'-2"... -
Page 8: Mechanical Installation
Scan the QR code at right to view a quick cart assembly video. Cart Assembly youtu.be/G4zcF3RbavQ Reference Drawings: Mechanical Specifications, MS-2113 ............. DWG-3270213 Cart Assembly, Portable Display ..............DWG-3274045 The display cart (Figure 4) comes standard with four wheels. Cart assembly requires the following pieces of hardware: •... -
Page 9: Optional Equipment Installation
Cover Installation, MS-2113 ................DWG-3274720 Ad Panel A custom advertising/school logo panel may be added to the MS-2113. Threaded inserts in the top of the cabinet allow attachment using only three screws. The 12" H x 52" W (305 mm, 1.32 m) aluminum panel runs the full width of the scoreboard. DWG-3274569 in Appendix A illustrates the ad panel installation. -
Page 10: Electrical Operation
When the power cord is not connected, the display runs on battery power. The MS-2113 is shipped ready for use. The battery charger is factory-mounted in the display, and all internal wiring is in place and connected to the driver and batteries. -
Page 11: Signal
Reference Drawing: System Riser Diagrams- MS-2113 ..............DWG-3274967 The MS-2113 can receive control signal four different ways as described below. Refer also to DWG-3274967 in Appendix A for diagrams of each of these control setups. Setup 1: A wireless RC-100/200 handheld controller communicates with a radio base •... -
Page 12: Rc-200 Base Station Settings
MX-1 and DAK Score Reference Drawing: MX-1 Installation Options on MS-2113 ............DWG-4107389 For MX-1 Interface Box installation, refer to DWG-4107389. Refer also to the MS-2113 Radio Installation Quick Guide (DD4661729), shipped with the scoreboard and available online www.daktronics.com/manuals. Electrical Operation... -
Page 13: Battery Care & Charging
This section describes care and operation of the on-board battery charging system. On-Board Charger Reference Drawing: Electrical Specifications- MS-2113 ..............DWG-3275249 On a full charge, the two internal batteries provide enough power for approximately 14 hours of normal operation. Keeping the batteries charged will help extend their life. Be sure that the batteries are fully charged before storing the display during the off-season;... - Page 14 The charge cycle is as follows: 1� Soft Start – Charger verifies connections are good and the battery is capable of accepting a charge. Batteries with very low voltage (near dead) will be slowly charged to not harm the battery. When the battery voltage reaches 10 V for 30 seconds, the charger switches to the next stage.
-
Page 15: Operation
If the in-line 10 A, 32 VDC fuse in either cable blows due to improper connection to a battery, replace the fuse with an identical 10 A fuse only (Daktronics part # F-1006). Never replace a blown fuse with a higher-value fuse. -
Page 16: Radio Interference
Problem Cause Solution Replace DC output fuse with a Open DC output fuse. 10 amp fuse. Green LED stays on when Faulty or contaminated terminal Clean and tighten or repair all the battery is known to be connections. terminal connections. low. -
Page 17: Dc Connection Precautions
• Be extra cautious while servicing the display to reduce the risk of dropping a tool onto the battery. It might spark or short-circuit the battery or another electrical part, which could cause an explosion. • Remove all personal metal items such as rings, watches, and other jewelry when working with a lead-acid battery. -
Page 18: Troubleshooting
Troubleshooting Disconnect power before doing any repair or maintenance work on the display. Permit only qualified service personnel to access internal display electronics. Disconnect power when not using the display. Troubleshooting Table The table below lists potential problems with the display and indicates possible causes and corrective actions. This list does not include every symptom that may be encountered, but it does present several of the most common situations that may occur. Problem Possible Cause Solution/Items to Check... - Page 19 Possible Cause Solution/Items to Check Check fuse in fuse holder labeled F5. If Display does not run on Blown fuse blown, replace with Daktronics part # 120 VAC power F-1077. Ensure the correct sport code is being Incorrect sport code used for the display model. Refer to the appropriate console operation manual.
-
Page 20: Component Locations & Access
Reference Drawing: Electrical Specifications- MS-2113 ..............DWG-3275249 In the MS-2113, the entire back panel is hinged on the right side (as viewed from the rear). The left-rear side of the display has 3 slotted latches securing the access panel. To access the internal scoreboard components, use a flathead screwdriver to turn all 3 latches 1/2 twist counterclockwise and swing the access panel open. -
Page 21: Led Driver
LED Driver Reference Drawings: Specifications; Gyrus LED Driver, 16 Col ............DWG-3071833 Electrical Specifications- MS-2113 ..............DWG-3275249 Schematic: MS-2113 ..................DWG-4107359 The LED driver performs the task of switching digits on and off within the display. LED drivers are located inside of a driver enclosure. Refer to DWG-3275249 to view the location and components of the driver enclosure. -
Page 22: Setting The Driver Address
Addresses are set through the S2 (L) and S3 (H) rotary switches on the driver (Figure 8) using a small flathead screwdriver. The MS-2113 will always be set to address 11, where H = 0 and L = B. Figure 8: Driver Address Dials... -
Page 23: Horn
Horn Reference Drawing: Electrical Specifications- MS-2113 ..............DWG-3275249 A 12 V buzzer horn is mounted in the upper-left corner of the front face panel (as viewed from the front). DWG-3275249 in Appendix A shows the horn location from the front as well as when accessing internal components from the rear. To replace a horn: 1�... -
Page 24: Daktronics Exchange And Repair & Return Programs
Exchange Program The Daktronics Exchange Program is a service for quickly replacing key components in need of repair. If a component fails, Daktronics sends a replacement part to the customer who, in turn, returns the failed component to Daktronics. This decreases equipment downtime. -
Page 25: Repair & Return Program
Repair & Return Program For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a part for repair, follow these steps: 1� Call or fax Daktronics Customer Service. Refer to the appropriate number in the chart on the previous page. - Page 26 Daktronics Exchange and Repair & Return Programs...
-
Page 27: A Reference Drawings
Cover Installation, MS-2113 ................DWG-3274720 System Riser Diagrams- MS-2113 ..............DWG-3274967 Electrical Specifications- MS-2113 ..............DWG-3275249 Battery Service- MS-2113.................. DWG-3276260 Radio Receiver Installation- MS-2113 ............. DWG-3276286 Base Station: Outdoor Installation ..............DWG-3640913 Schematic: MS-2113 ..................DWG-4107359 MX-1 Installation Options on MS-2113 ............DWG-4107389 Reference Drawings... - Page 28 This page intentionally left blank.
- Page 30 EXTERNAL ANTENNA ON OUTSIDE FACE OF SCOREBOARD. ANTENNA PART NUMBER AND SIZE WILL VARY. TX RX TX RX CL / RS232 RANGE...
- Page 31 DAKTRONICS, INC. THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN CONSENT OF DAKTRONICS, INC. COPYRIGHT 2012 DAKTRONICS, INC. ALL SPORT RADIO ADDED GYRUS VIEW DATE: INSTALLATION DRAWING;...
- Page 32 DAKTRONICS, INC. DRAWING ARE CONFIDENTIAL AND PROPIETARY. DO NOT BROOKINGS, SD 57006 REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED OFF = Disconnected WRITTEN CONSENT OF DAKTRONICS INC. Copyright © 2015 Daktronics Inc. DO NOT SCALE DRAWING PROJECT Reference Drawings TITLE SPECIFICATIONS;...
- Page 33 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) DAKTRONICS MS-2113...
- Page 34 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) MS-2113 PROJECT:...
- Page 35 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) MS-2113 PROJECT:...
- Page 36 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) MS-2113 CAPTION OPTIONS, MS-2113...
- Page 37 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) MS-2113 PROJECT:...
- Page 38 DOMESTIC USE ONLY BASE STATION WITH HANDHELD RADIO ALL SPORT 1610/5012, CABLE CONTROL. CONNECTION POWER AND SIGNAL CONNECTORS ARE LOCATED ON THE REAR DOOR OF MS-2113 BASE STATION SCOREBOARD RECEIVER IS LOCATED 120V AC BEHIND THE FACE PANEL OF FOR CHARGING DISPLAY.
- Page 39 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) MS-2113 ELECTRICAL SPECIFICATIONS- MS-2113...
- Page 40 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) MS-2113 BATTERY SERVICE- MS-2113...
- Page 41 TOOTH LOCK WASHER RADIO RECEIVER NOTES: TURN THE THREE "1/2 " TURN ACCESS LATCHES THAT ARE SECURING THE BACK OF THE MS-2113, AND SWING THE DOOR OPEN. PER EC-21871; ADDED U-BOLTS AND NECESSARY DESCRIPTIONS DATE: 12 JUL 16 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY.
- Page 42 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2017 DAKTRONICS, INC. (USA) RC-200 PROJECT:...
- Page 43 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2019 DAKTRONICS, INC. (USA) OUTDOOR SCOREBOARD PROJECT: SCHEMATIC;...
- Page 44 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2019 DAKTRONICS, INC. (USA) MX-1 BOX ASSEMBLY...
-
Page 45: B Daktronics Warranty & Limitation Of Liability
Daktronics Warranty & Limitation of Liability This section includes the Daktronics Warranty & Limitation of Liability statement (SL-02374). Daktronics Warranty & Limitation of Liability... - Page 46 This page intentionally left blank.
- Page 47 Warranty Coverage. Daktronics warrants to the original end user (the “End User”, which may also be the Purchaser) that the Equipment will be free from Defects (as defined below) in materials and workmanship for a period of one (1) year (the “Warranty Period”). The Warranty Period shall commence on the earlier of: (i) four weeks from the date that the Equipment leaves Daktronics’...
- Page 48 In no event shall Daktronics be liable for loss, damage, or injury of any kind or nature arising out of or in connection with this Warranty in excess of the Purchase Price of the Equipment. The End User’s remedy in any dispute under this Warranty shall be ultimately limited to the Purchase Price of the Equipment to the extent the Purchase Price has been paid.
- Page 49 For End User’s protection, in addition to that afforded by the warranties set forth herein, End User may purchase extended warranty services to cover the Equipment. The Extended Service Agreement, available from Daktronics, provides for electronic parts repair and/or on-site labor for an extended period from the date of expiration of this warranty. Alternatively, an Extended Service Agreement may be purchased in conjunction with this Warranty for extended additional services.
- Page 50 This page intentionally left blank.