Tps Ii Specifications - Art TPS II User Manual

TPS II SPECIFICATIONS
Dimensions
Weight
Input Connections
Output Connections
Input Impedance XLR, ¼"
Output Impedance XLR, ¼"
Maximum Input Level, XLR
Maximum Input Level, ¼"
Maximum Output Level, XLR
Maximum Output Level, ¼"
CMRR
Frequency Response
Dynamic Range
Total Harmonic Distortion (THD)
Maximum Gain
Equivalent Input Noise (EIN)
Tube Type
Power Requirements
ART maintains a policy of constant product improvement. ART reserves the right to
make changes in design or make additions to or improvements upon this product
without any obligation to install same on products previously manufactured. Therefore,
specifications are subject to change without notice.
Applied Research & Technology
215 Tremont Street
Rochester, NY 14608 USA
(585) 436-2720
(585) 436-3942 (FAX)
www.artproaudio.com
XLR to XLR
¼" to ¼"
XLR to ¼"
¼" to XLR
XLR to XLR
¼" to ¼"
1.75"H x 19"W x 6.5"D
5.5 lbs.
Front: XLR (balanced)/ ¼" TS (unbalanced)
Rear: Switchable XLR(bal.), ¼" TRS
XLR (balanced), ¼"TS
150-3K ohms variable, 1M ohm
300 ohms, 150ohms
+19dBu
+22dBu
+28dBu
+22dBu
>75dB (typical @ 1kHz)
5Hz to 50kHz, +/-.1dB
>100dB
<0.01% (clean), <0.1%(warm)
80dB
68dB
74dB
74dB
-129dBu (A weighted)
-105dBu (A weighted)
12AX7A, Dual Triode, Hand Selected
USA – 110-125V AC / 50hz/16W - Export
units configured for country of destination.
© 2003 Applied Research & Technology
- 18 -