ATH-Heinl Cross Lift 50+ Operating Instructions Manual page 99

8. Lift configuration
a. Raise the lift to a height of approx. 1,000 mm.
b. Continue moving the lift to the next catch position and ensure that both scissors are in the
same catch (same height).
c. Use a spirit level to check the level of the platform. If necessary, the platform can be
adjusted using the built-in levelling screws. (Image 1)
d. When using an axle alignment turntable, this can be adjusted using the screw positioned
underneath it (optional). (Image 2)
Imag
e 1
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 33 -
Imag
e 2