Launching Dr Control - Tascam DR-44WL Reference Manual

12 – Using Wi-Fi
iOS device example
2. When the device Wi-Fi is turned on, a Wi-Fi device SSID list
will appear. Select the SSID of the external router to use.
iOS device example
3. Input the password for that external router.
A Wi-Fi connection between the smartphone and the
external router will be established.
8 Checking the Wi-Fi connection information
1. When the Wi-Fi screen is open, use the wheel to select the
INFO item, and press the ENTER/MARK or / button.
Exec appears selected for the INFO item.
2. Press the ENTER/MARK button to open the INFORMATION
screen.
NAME, MAC ADDRESS, and IP ADDRESS information is shown.
NAME shows the name to select when using DR CONTROL to
operate this unit.
MAC ADDRESS shows the MAC address assigned to the unit.
IP ADDRESS is the number on the Wi-Fi network assigned by
the router.
56
TASCAM DR-44WL
Android device example
Android device example

Launching DR CONTROL

1. After completing the Wi-Fi connection, launch the DR
CONTROL app (installed beforehand) on the smartphone or
other device.
NOTE
Always use the latest version of DR CONTROL.
2. A screen like the following will appear when the app
launches, and remote operation of the device will be
enabled.
iOS device example
8 When multiple DR-44WL/DR-22WL units are
connected to the same router in VIA ROUTER mode
1. A little while after the app launches, "DR List" will appear.
Select the DR-44WL that you want to control.
iOS device example
2. If "DR is not found" appears, touch the "OK" button, then
touch the "CONNECT" button to reacquire the list.
iOS device example
Please refer to your smart phone's operation manual for more
details.
Detailed descriptions, on the "DR CONTROL" application,
including the "DR CONTROL reference manual", can be
downloaded from the TEAC Global Site (https://teac-global.
com).
Android device example
Android device example
Android device example