Reverb Type Pre-Set List; Setting The Xri Information Recording Function (4Ch Mode Only); Viewing Xri Information (4Ch Mode Only); Deleting Xri Information (4Ch Mode Only) - Tascam DR-44WL Reference Manual

10 – Useful functions
LEVEL:
Use this to change the input/output level of the sound set
with SOURCE to which reverb is applied. Settings can be
selected from 0 - 100. (default value: 70)
3. Use the wheel to select (highlight) the desired item and
press the ENTER/MARK or / button to set options/
values.
4. Use the wheel to set the desired option/value.
5. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
6. Once the setting has been completed, press the 8/HOME
button.
CAUTION
When sampling frequency is set to 96 kHz or the WAV file
with 96 kHz sampling frequency is played back, the reverb
function does not work. In this case, reverb can be set.

Reverb type pre-set list

Pre-set name Effect
HALL 1 (default
A bright effect, like a spacious hall
value)
A warm effect, like a spacious hall
HALL 2
Small room effect
ROOM
Studio effect
STUDIO
Bright plate reverb
PLATE 1
Warm plate reverb
PLATE 2
Setting the XRI information recording
function (4CH mode only)
When recording in the BWF file format, the unit can also record
XRI information (eXtended Recording Information), which
includes the input volume and other recording settings.
1. Press the MENU button to open the MENU Screen.
2. Use the wheel to select SYSTEM, and press the ENTER/MARK
or / button.
The SYSTEM screen opens.
3. Use the wheel to select XRI MODE, and press the ENTER/
MARK or / button.
4. Use the wheel to set the XRI information recording mode.
Options:
OFF: XRI information not recorded
ON (default): Record only XRI information
ON+GPS: Record XRI and GPS information
5. Press the ENTER/MARK button to confirm the setting and
reenable setting item selection.
6. When finished making the setting, press the 8/HOME
button to return to the Home Screen.
CAUTION
GPS information is acquired from the dedicated app (DR
CONTROL). This information cannot be acquired when using
the unit without the app. Information acquired is as follows.
50
TASCAM DR-44WL
LATITUDE: Latitude data
LONGITUDE: Longitude data
Viewing XRI information (4CH mode
only)
You can check XRI and GPS information recorded in a BWF-com-
pliant WAV file on the XRI screen.
Follow these procedures to open the XRI screen.
1. Use the . and / buttons or the BROWSE screen to
select the file with information that you want to view.
2. While the Home Screen is open when stopped, press the
QUICK button to show the quick menu pop-up.
3. Use the wheel to select XRI.
4. Press the ENTER/MARK button to open the XRI screen that
shows the following XRI information.
If no information has been recorded, No Data is shown
5. Use the . and / buttons to switch between tabs to
view XRI information for each track. Select the OTHERS tab to
view the following information about the unit
6. Press the 8/HOME button to return to the Home Screen.
Deleting XRI information (4CH mode
only)
You can delete XRI and GPS information.
1. When the XRI screen is open, press the QUICK button to
open the quick menu pop-up.
2. Use the wheel to select which information to delete.
Options