Metronome Function; Reverb Function; Setting The Reverb Function - Tascam DR-44WL Reference Manual

10. Once tuning has been completed, set SOUND to OFF and
press 8/HOME button to return to the Home screen.

Metronome function

Metronome operates when the METRONOME screen is open.
1. Press the MENU button to open the MENU screen.
2. Using the wheel, select (highlight) TOOLS and press the
ENTER/MARK or / button.
TOOLS screen appears.
3. Use the wheel to select METRONOME and press the ENTER/
MARK or / button. Exec appears selected for the
METRONOME item.
4. Press the ENTER/MARK button to open the METRONOME
screen.
Set the following items on the METRONOME screen.
TEMPO
Set speed between 20 - 250 (BPM).
(default value: 120)
BEAT
Set beat between 1 - 9 (default value: 4)
This will accent the first beat.
SOUND
You can set the metronome sound to CLICK, STICK or
BELL. (default value: CLICK)
LEVEL
Set the metronome volume between 0 and 100. (default
value: 50)
5. Use the wheel to select the item to set and press the ENTER/
MARK button. This shows the parameters for the item to be
set.
6. Use the wheel to select the value. Press the ENTER/MARK
button to confirm it and enable selection of other setting
items.
7. Repeat steps 5 and 6 as necessary.
8. Press the 7/9 button to start the metronome. Press the
7/9 button to stop the playing metronome.
9. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
10 – Useful functions

Reverb function

A reverb is incorporated into this unit.
When recording or practicing, the input signal can be reverbed
or the playback signal can be reverbed during playback.
When reverb function is ON, the
top of the home screen.

Setting the reverb function

1. Press the MENU button to open the MENU screen.
2. Using the wheel, select (highlight) REVERB and press the
ENTER/MARK or / button.
The REVERB screen is displayed.
The REVERB screen has four setting items.
REVERB:
Set the reverb on/off status (default value: OFF).
TYPE:
See the reverb type from the pre-set items. See (See
"How to download and install the exclusive application
(DR CONTROL)" on page 53.) for more details on reverb
types.
SOURCE:
You can select input/output source to be reverbed from
the following: (default value: MIX)
SOURCE (options) Detail
Enabled for SEND:
Reverb can be added to the
MIX (default value) output sound.
The recorded sound is not
affected.
Enabled for input:
Reverb can be added to the sound
input from the built-in mic.
INT MIC
Sound can be recorded with
reverb added.
Enabled for input:
Reverb can be added to the sound
input from external mics and
EXT IN
devices.
Sound can be recorded with
reverb added.
When MIX is sent, the forwarding level (SEND) to the
effect of each signal can be set on the MIXER screen. (See
"Setting the mixer" on page 47.)
icon will appear at the
REVERB icon
49
TASCAM DR-44WL