Tascam DR-44WL Reference Manual page 54

12 – Using Wi-Fi
3. SSID and PASSWORD appear on the display.
NOTE
The SSID is the name of the wireless LAN access point
(wireless LAN device).
4. Select "setting" w "Wi-Fi" on the device.
iOS device example
5. When Wi-Fi is enabled on for your device, it will display the
SSID list of Wi-Fi equipment. Select the SSID displayed on
the DR-44WL.
iOS device example
6. A password input screen appears on the device. Enter the
password shown on the display of the unit.
7. Wi-Fi connection is established between the DR-44WL and
your smart phone, and the Wi-Fi indicator of the unit will
light.
NOTE
The above description on operating the device are for
reference only. Please refer to your smart phone's operation
manual for more details.
54
TASCAM DR-44WL
Android device example
Android device example
8 Connecting the DR-44WL to a smart phone or tablet
via Wi-Fi (from second time onward)
When you establish a connection between the DR-44WL and
your smart phone for the first time and need to connect them
again, you only need to select the SSID from the second time
onward.
1. Press the Wi-Fi button of the DR-44WL; the Wi-Fi indicator
will start to flash.
A CONNECT TO THE NEW DEVICE ? pop-up message appears
on the display to determine whether or not the connection
is new.
2. Your smart phone already made a peer-to-peer connection;
simply press the 8/HOME button.
3. Pop-up message on the display disappears and the DR-44WL
switches to a standby mode to connect to your smart phone.
4. In your device, select "setting" w "Wi-Fi".
5. When Wi-Fi is enabled on for your device, it will display the
SSID list of Wi-Fi equipment. Select the SSID displayed on
the DR-44WL.
6. Wi-Fi connection is established between the DR-44WL and
your smart phone, and the Wi-Fi indicator of the unit will
light.
NOTE
The above description on operating the device are for
reference only. Please refer to your smart phone's operation
manual for more details.
8 Checking Wi-Fi connection information
1. When the Wi-Fi screen is open, use the wheel to select the
INFO item, and press the ENTER/MARK or / button.
Exec appears selected for the INFO item.
2. Press the ENTER/MARK button to open the INFORMATION
screen.
SSID and PASSWORD information appears.
The SSID is used to identify this unit on the Wi-Fi network.
The PASSWORD is necessary when connecting to this unit by
Wi-Fi.