Table of Contents
Advertisement
1.3 DSP56F801EVM Connections
An interconnection diagram is shown in
+12V DC power supply to the DSP56F801EVM board.
PC-compatible
Computer
Figure 1-3. Connecting the DSP56F801EVM Cables
Perform the following steps to connect the DSP56F801EVM cables:
1. Connect the parallel extension cable to the Parallel port of the host computer.
2. Connect the other end of the parallel extension cable to P2, shown in
on the DSP56F801EVM board. This provides the connection which allows the host
computer to control the board.
3. Make sure that the external +12V DC, 4.0A power supply is not plugged into a
120V AC power source.
4. Connect the 2.1mm output power plug from the external power supply into P1,
shown in
Figure
5. Apply power to the external power supply. The green Power-On LED, LED8, will
illuminate when power is correctly applied.
1-4
Figure 1-3
Parallel Extension
Cable
Connect cable
to Parallel/Printer port
1-3, on the DSP56F801EVM board.
DSP56F801EVM Hardware User's Manual
for connecting the PC and the external
DSP56F801EVM
P2
P1
External
with 2.1mm,
+12V
receptacle
Power
connector
Figure
1-3,
Advertisement
Table of Contents
