Nap Alarm; Connecting External Playback Devices - Silvercrest SCUR 3 A1 Operating Instructions And Safety Instructions

Cd clock radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32

Nap alarm

You can use this function to set a nap alarm that will wake you after 1–120 minutes
with an alarm.
In standby mode, press the SLEEP/NAP button
"NAP" and "10" (minutes) appear on the display
Use the −VOL+/ І◄◄ TUNE ►►І dial
1 and 120) after which you would like to be woken.
The NAP function is activated after around 5 seconds if no other button is
pressed. As long as the NAP function is activated, "NAP" is shown on the
display
Press the SLEEP/NAP button
to show the remaining time until the alarm.
Press the SLEEP/NAP button
To deactivate the NAP function, press the SLEEP/NAP button
turn the −VOL+/ І◄◄ TUNE ►►І dial
appears on the display

Connecting external playback devices

You can connect external playback devices, such as an MP3 player or a smart-
phone, to the AUX IN input
radio.
NOTE
Switch the CD clock radio and the external device off before you connect
them with each other. Note also the operating instructions for the device
that you want to connect to the CD clock radio.
To connect external playback devices, you will need an audio cable (not
supplied) with a 3.5 mm Ø jack plug for the AUX IN input
radio. The plug on the other end of the audio cable will depend on the audio
output of the external device.
Connect the plug on the audio cable to the audio output on the external
device and the AUX IN input
Press the
Press the
Start playback on the external device. The playback is now controlled
via the external device only. You can also change the volume and sound
settings on the CD clock radio.
Turn off both devices before you disconnect them from each other.
Pull the plug on the audio cable out of the AUX IN input
SCUR 3 A1
.
.
to use this as a playback source for the CD clock
/SOURCE button
/SOURCE button
.
.
to set a time in minutes (between
once while the NAP function is activated
to switch off the alarm.
to the left until "NAP" no longer
on the CD clock radio.
to switch on the CD clock radio.
briefly until "AUX" appears on the display
and
on the CD clock
.
.
GB │ IE
 49

Advertisement

Table of Contents
loading

This manual is also suitable for:

306411

Table of Contents