Operating Manual; Important Safeguards; General; Information In This Manual - CASO DESIGN VC 10 Original Operating Manual

Operating Manual

1

1.1 Important Safeguards

1. Read all instructions before using.
2. This appliance generates heat. Do not touch hot surfaces.
3. To protect against electrocution do not immerse any part of the unit in liquid.
4. Unplug the unit when not in use and before cleaning. Allow unit to cool before cleaning.
5. Inspect the unit, its power cord and plug for any damage before using. If there appears
to be any damage or if the unit shows signs of malfunctioning, do not use the appliance.
Return the appliance to the nearest authorized service facility for inspection and repair.
6. Do not use accessory attachments that have not been recommended by the
manufacturer.
7. Do not use outdoors.
8. Do not allow cord to touch hot surfaces or hang over sharp edges such as those on
countertops.
9. Do not place the unit on or near a hot gas or electric burner, or heated oven.
10. Exercise caution when moving cookware containing hot oil or other hot liquids.
11. To unplug the unit, turn off the unit then remove the plug from its outlet.
12. Do not use this appliance for any unintended use.
13. SAVE THESE INSTRUCTIONS.

1.2 General

Please read the information contained herein so that you can become familiar with your
device quickly and take advantage of the full scope of its functions.
Your vacuum sealer system will serve you for many years if you handle it and care for it
properly. We wish you a lot of pleasure in using it!

1.3 Information in this manual

These Operating Instructions are a component of the vacuum sealer system (referred to
hereafter as the Device) and provide you with important information for the initial
commissioning, safety, intended use and care of the device. The Operating Instructions
must be available at all times at the device. This Operating Manual must be read and
applied by every person who is instructed to work with the device:
 Commissioning
Keep the Operating Manual in a safe place and pass it on to the subsequent owner along
with the device.
 Operation  Troubleshooting and/or  Cleaning
5