Interfaces; Overview - Bosch Rexroth VEP 15.6 Multi Touch Operating Instructions Manual

Operator displays – housing devices and built-in devices
Table of Contents

Advertisement

Bosch Rexroth AG

Interfaces

Loss of UL/CSA conformity due to modifications at the device.
UL and CSA marking applies only to the device upon delivery. After
modifying the device, verify the UL and the CSA conformity.
9 Interfaces
Fig. 9-1: Interfaces of the built-in devices (for names, refer to the following table)
Fig. 9-2: Interfaces of the housing devices (for names, refer to the following table)

9.1 Overview

Name at the
Connection type
housing
① XD1
24 V DC voltage supply
② XF20
Gigabit Ethernet interface
③ XF21
Gigabit Ethernet interface
④ XBAT
Battery connection
⑤ XG10
CFAST slot
16/53
VEP 15.6 Multi Touch, VEP 21.6 Multi
2
3
4 5 6
7 8
1
2
3
1
4 5 6
Connector type, inte-
grated
3-pin, MC1,5/3- G-3,5
THT
RJ45 socket
RJ45 socket
Molex Micro-Fit 3 mm
CFAST socket
7
Mating connector or ca-
ble (from outside)
3-pin, FK-MCP 1,5/3-
ST-3,5
RJ45 plug
RJ45 plug
Molex 43645-0200
(or compatible)
CFAST card
DOK-SUPPL*-VEPXX.6MTHU-IT02-EN-P
Touch

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rexroth vep 21.6 multi touch

Table of Contents