LEGRAND 5 742 00 Manual
LEGRAND 5 742 00 Manual

LEGRAND 5 742 00 Manual

Connected socket module

Advertisement

Available languages

Available languages

Connected socket module
5 742 00/19/28/37
This product is a connected accessory which requires you to buy and install the Arteor
with Netatmo connected starter pack first.
Pack contents

Safety instructions

This product should be installed in compliance with installation rules, preferably by a qualified electrician.
Incorrect installation and/or incorrect use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific
mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the
instructions. All Legrand products must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights
to replacement and guarantees. Use only Legrand brand accessories.
Connected socket module

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5 742 00 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LEGRAND 5 742 00

  • Page 1 Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.
  • Page 2 Before you start: wiring precautions To control a socket, only use the products: x 1 x 1 or several Connected control socket Wireless controls for all control points (not included in this pack) Do not use: a connected switch (with dimmer option) to control a connected socket module or a traditional power outlet.
  • Page 3 Necessary safety precautions Switch OFF the power Make sure that the power at the main circuit is OFF before continuing breaker with the installation. Install the connected socket module Wire the connected socket module 2.5 mm2 rigid wire recommended 16 A - 100-240 V~ 3680 W max cos 0.8 N (neutral) = blue...
  • Page 4 To add a connected product to your connected installation, you should follow the instructions: - in the user guide in your connected starter pack - in the Legrand Home + Control application (Settings/Add a new product section) - or consult the user manual on legrand.fr www.legrand.fr/reference/574219 LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE •...
  • Page 5 ‫ يجب فت ح ُ ها وإصال ح ُ ها حص ر ا ً من‬Legrand ‫ال تفتح أو تفك أو تع د ّ ل أو تح و ِّ ر المن ت َ ج ما لم ي ُ شَ ر إلى ذلك...
  • Page 6 ‫قبل بدء العمل: االحتياطات الخاصة بتوصيالت األسالك‬ :‫للتحكم في المقابس، ال تستخدم سوى المنتجات التالية‬ ‫و‬ ‫أو أكثر‬ ‫وحدات التحكم الالسلكية لجميع مواضع التحكم‬ ‫مقبس التحكم المتصل‬ )‫(غير موجودة في هذه العلبة‬ ‫يحظر استخدام: المفاتيح المتصلة (مع مفتاح تغيير شدة اإلضاءة االختياري) للتحكم في وحدات المقابس المتصلة أو مآخذ التيار‬ .‫التقليدية‬...
  • Page 7 ‫① احتياطات السالمة الضرورية‬ ➊ ➋ ‫افصل التيار الكهربائي من‬ ‫تأكد من فصل التيار الكهربائي قبل متابعة‬ ‫القاطع الرئيسي للدائرة‬ .‫خطوات عملية التركيب‬ ‫الكهربية‬ ‫مفصول‬ ‫② تركيب وحدة المقبس المتصل‬ ➊ ➋ ‫قم بتوصيل أسالك وحدة المقبس المتصل‬ ‫يوصى باستخدام سلك صلب‬ 2‫مقاس...
  • Page 8 :‫③ إلضافة منتج متصل إىل املنتجات املتصلة املركبة لديك، يجب اتباع اإلرشادات‬ ‫- الواردة في دليل المستخدم المرفق مع علبة المنتجات األساسية المتصلة‬ )‫ (القسم اإلعدادات/إضافة منتج جديد‬Legrand ‫ الخاص بشركة‬Home + Control ‫- المضمنة في التطبيق‬ legrand.fr ‫- أو ر اجع دليل المستخدم المتوفر على‬...

This manual is also suitable for:

5 742 195 742 285 742 37

Table of Contents