Dual technology 0-10 volt wall switch occupancy sensor (18 pages)
Summary of Contents for LEGRAND Arteor HD15
Page 1
Output 24 VDC - 350 mA - 8.4 W max. +45°C / +5°C / «Legrand recommends the use of screened FTP cables, when installing the HD15 + jack socket kit in an interference area.» Conforms to 61000-6-1 with U/UTP - F/UTP cable Conforms to 50090-2-2 with F/UTP cable...
Page 2
U/UTP F/UTP SF/UTP 332 62 332 62 332 62 80 mm mini 50 mm mini 50 mm mini F/UTP SF/UTP U/UTP AWG 22...25 AWG 26 � � � 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 EIA 568 A EIA 568 B...
Page 3
� � 327 60 � � • Cabling • • L = 20 cm 0,75 mm 0,75 230 V � � 75 m max. 230 V � L = 20 cm 0,75 mm 0,75 � • • Fitting • 50 mm min. 105 82...
Page 4
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired ealy by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.