Related Manuals for 3M 4655
Summary of Contents for 3M 4655
- Page 1 3M Occupational Health and Environmental Safety Fall Protection Equipment 4655 Beam Trolley User Instructions User Instructions for 3M 4655 Beam Trolley. Important: Keep these User Instructions for reference.
- Page 2 Purpose The 3M 4655 Beam Trolley is designed as an overhead mobile anchorage connector. It is to be used as part of a personal fall arrest system to provide lateral mobility, and help reduce the pendulum affect in the event of a fall.
- Page 3 Adjust the 4655 Beam Trolley by moving the spacing washers and tubes to the inside or outside of the side plates to fi t the beam fl ange width plus 1⁄16" running clearance on each side of the fl ange (Fig. 1). The clevis must be in the center of the 4655 Beam Trolley.
- Page 4 Warranty does not cover equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of 3M. 3M shall be the sole judge of product condition and warranty options. This warranty applies only to original purchaser and is the only warranty applicable to this product.
Need help?
Do you have a question about the 4655 and is the answer not in the manual?
Questions and answers