Table of Contents
Advertisement
Maintenance
Charging the Battery
The blood pressure monitor comes with a
rechargeable Li-ion battery inside. Use the included
Type-C USB cable to charge the monitor.
flash on the screen when the monitor needs to be
charged.
1.
Insert the USB charging cable into the USB
charging socket on the monitor.
2.
Plug the USB charging cable into a DC 5V adapter
and plug into an outlet. You can also plug the
cable into a powered USB outlet.
3.
The blood pressure level indicator bars will flash
while the monitor is charging. When the monitor is
fully charged, the indicator bars will light up solid
and stop flashing, and
will
[Figure 4.1]
will display full bars.
Note:
• Charging may take 3–4 hours.
• Every 2 months (or when battery life is
significantly shorter), optimize battery
performance.
• Battery life depends on the frequency
and time of use. If battery life is unusually
reduced, contact Customer Support (see
page 34).
• Only use a Type-C USB charging cable to
charge the monitor.
• Do not use the monitor while charging.
• In extreme conditions, the battery may leak
corrosive fluid. If this comes into contact with
eyes or skin, rinse immediately with water and
seek medical attention.
Figure 4.1
21
Advertisement
Table of Contents
