Table of Contents
Advertisement
Display Readings
Symbol
Solution
Air may be leaking or pulse may be too weak. Reattach the cuff and
remeasure.
Blood pressure cannot be detected due to interference. Make sure you are
seated and positioned correctly before testing again.
The measurement result is not correct. Remeasure.
Inflation has failed. Check the cuff and remeasure again.
Air pressure is too high. Remeasure.
Charge the monitor with the provided Type-C USB charging cable.
Remove the arm cuff and wait 2–3 minutes before taking another
measurement. If this error continues to appear, contact your physician.
20
Advertisement
Table of Contents
