Advertisement
MAGICPLATE'" MOUNTING OPTION 3 (Continued)
NOTE: For mounting directly" to Galaxy
S9/S9+,
use the (2) small plates with the
integrated template guide for Galaxy as shown. "For mounting directly to
device only. Do not mount to case.
0
Remove the
~
ft
Line up
"U"
white paper
g
channel to the
backing from
. . . .
fingerprint reader
both plates
.
.
and camera
'
on the phone.
GIIIUJTtmplal<!
e
Remove the backing from the protective film as shown on
the removal tabs
(A),
and place between the device and
the lower plate
(B).
The protective film must be used when
applying MAGICPLATE'" directly to the back of device.
A
Remove
' - "
template guide.
REMOVING THE PLATE
Use a thin plastic card to carefully lift the plate's adhesive surface from the mounting surface. Slowly lift
up and remove the plate.
Do not use any heat or liquids
to
remove the plate, due
to
risk of damaging your phone.
Contact Scosche Customer Service for any addltional assistance at 800.363.4490 Ext 1 or
customerservice@scosche.com
3
Advertisement
