Description; Product Overview; Intended Use - Dräger Aerotest 5000 Instructions For Use Manual

2

Description

2.1

Product overview

1
2
3
4
5
6
1 Battery compartment
2 Socket for the Dräger Oil-Impactor or the Dräger-Tube Oil 10/a-P
3 Socket for the Dräger-Tube Water Vapor
4 Socket for the Dräger-Tube Carbon Dioxide
5 Socket for the Dräger-Tube Carbon Monoxide
6 Sintered air outlet
7 Display (touch screen)
8 Flow control valve
9 Connection air inlet
10 Button for switching on the device
11 USB port
12 Mains supply connection
Dräger Aerotest 5000
2.2
The Dräger Aerotest 5000 is used to test the quality of the breathing
air of a low pressure system on a regular basis. It is used to test the
breathing air in accordance with legal standards, such as EN 12021,
12
BS EN 12021, CGA G7.1, CSA Z 180.1, AS/NZS 2299.
11
The Dräger Aerotest 5000 is designed for compressed air systems of
2.5 bar to 10 bar. In combination with the F 3002 pressure reducer it
10
can also be used to test high pressure systems of up to 300 bar.
During the test the air supply airflow rate is automatically displayed.
Dräger-Tubes or the Dräger Oil-Impactor are used to carry out the
9
measurement. The following substances can be measured in the
breathing air:
8
Additionally the unit will record the airline and ambient temperature,
7
the volume of airflow and pressure.
00222907.eps

Intended use

Oil,
Water vapor,
Carbon dioxide,
Carbon monoxide.
Oxygen
Description
15