Connect The Sensor To The External Housing; Preparing The Connection; Connection Procedure - Vega VEGAVIB Supplementary Instructions Manual

External housing • VEGAVIB
5 Connect the sensor to the external
housing
5.1

Preparing the connection

Follow the instructions in the operating instructions manual of the
sensor.
5.2

Connection procedure

Note:
The metal sensor housing cannot be opened. The electrical connec-
tion must be carried out on the instrument housing.
1. Insert the cable end through the cable entry on the external hous-
ing (instrument housing)
Tip:
Only run the cable loosely. The connection cable can only be sepa-
rated on the external housing (instrument housing). If the sensor
should be dismounted, the connection cable must be free to take out
the sensor.
Fig. 7: Connection of the sensor in the socket housing
1 Red
2 Yellow
3 Black
4 Green
5 Green/yellow (ground terminal)
2. Connect the cables to the terminals in the socket housing.

5 Connect the sensor to the external housing

1 2 3 4
13