Setting the date and time
To set the date and time of the RTC, follow these steps:
Press the
To modify the date, press the [f1] "Date" soft-key.
Enter the current date using the keypad digits.
Pressing the
When the date is correct, press any non-digit key to exit.
To modify the time, press the [f2] "Time" soft-key.
Enter the current time using the keypad digits.
Pressing the
When the date is correct, press any non-digit key to exit.
LT51 User Manual
key, followed by the [f3] "LT51 Settings" soft-key.
key will advance the cursor to the next digit.
key will advance the cursor to the next digit.
Configuring the Tester
37