Table of Contents
Advertisement
5. Configuring the Tester
The flexibility of the LT51 allows considerable freedom in configuring the tester
for more advanced testing applications. For most applications, however, the
standard configurations do not need to be modified and the automatic test suites
offer a simple alternative for more repetitive testing applications.
The more common configuration options are easily available through dedicated
keys rather than being buried in menu structures. Following are the LT51
configuration keys:
Configure the LT51 receiver parameters at the RTXa-b
terminals, such as Zrtx, terminated, HiZ, range setting and RTX
(2-Wire) or TX-RX (4-Wire) interface
Configure the LT51 transmitter parameters at the TXa-b
terminals, such as Ztx, output level & frequency, OFF / ON
mode, sweep mode
Controls operation of the marker during graphical display modes.
Functions include peak tracking, setting offsets and vertical
offset.
Set the LT51 frequency span, centre frequency, BW, AFC and
Averaging / peak hold.
Access stored test results, configure measurement settings and
display settings such as the RTC, and make adjustments to the
LT51 stored calibration constants.
LT51 User Manual
Configuring the Tester
25
Advertisement
Table of Contents
