Welcome Screen - H Heuer Instruments UMDT51A User Manual

Welcome screen

This is the screen that you see when you first turn on the LT51. It shows the
model name, installed options, serial number and software version.
Figure 2-2. LT51 welcome screen
The welcome screen will automatically clear, when the LT51 has successfully
started up.
If the screen does not clear, the LT51 tester has a problem. An incompatible
version of firmware for the LT51 hardware, will cause the screen to hang and
display an error message. Obtain the correct version of the firmware and down-
load it now. Otherwise, the LT51 must be returned to H Heuer Instruments for
service.
This screen can be accessed at any time by the following procedure:

press the

press the [f4] "Show Splash" soft-key to display the splash screen.
The splash screen can only be cleared by:

press the [f5] "Exit" soft-key.
LT51 User Manual
key, followed by the [f1] "Saved Results" soft-key.
Controls and connections
4