Settings (Pilot System ) - ABB REL301 Instruction Manual

I.L. 40-386.3
Information
Phase A current (magnitude & angle)
Phase A voltage (magnitude & angle)
Phase B current (magnitude & angle)
Phase B voltage (magnitude & angle)
Phase C current (magnitude & angle)
Phase C voltage (magnitude & angle)
Time and date
Local, Remote or both setting control
Carrier receive-1 (Yes or No) (RX1)
Carrier receive-2 (Yes or N0) (RX2)
Date of last setting change
LOP condition if present
LOI condition if present
Out-of-step block if present
4-20
TABLE 4-2. METERING DISPLAY
IA: magnitude (Amps) and angle (°)
VAG: magnitude (Amps) and angle (°)
IB: magnitude (Amps) and angle (°)
VBG: magnitude (Amps) and angle (°)
IC: magnitude (Amps) and angle (°)
VCG: magnitude (Amps) and angle (°)
TimeDate
Settings
Rx Ch1
Rx Ch2
Last Set
LOP
LOI
OS Block
Displayed As
(10/94)