Related Standards And Directives; Compliance With The European Machinery Directive - ABB +Q951 Original User Manual

22

Related standards and directives

Standard
EN 60204-1:2006 + AC:2010
IEC 60204-1:2005 + A1:2008
IEC 61508-1:2010
IEC 61508-2:2010
EN 61800-5-2:2017
IEC 61800-5-2:2016
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
IEC 62061:2015
EN ISO 12100:2010
ISO 13849-1:2015
EN ISO 13849-2:2012
EN ISO 13850:2015
ISO 13850:2015
IEC 61511-1:2016
IEC 61326-3-1: 2008
2006/42/EC
Other

Compliance with the European Machinery Directive

The drive is an electronic product which is covered by the European Low Voltage Directive.
However, the drive internal safety function of this manual (option +Q964) is in the scope of the
Machinery Directive as a safety component. This function complies with European harmonized
standards such as EN/IEC 61800-5-2. The declaration of conformity is delivered with the drive.
Option description and instructions
Name
Safety of machinery – Electrical equipment of machines –
Part 1: General requirements
Functional safety of electrical/electronic/programmable
electronic safety related systems - Part 1: General
requirements.
Functional safety of electrical/electronic/programmable
electronic safety related systems - Part 2: Requirements for
electrical/electronic/ programmable electronic safety related
systems.
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements – Functional
Safety of machinery – Functional safety of safety-related
electrical, electronic and programmable electronic control
systems
Safety of machinery – General principles for design – Risk
assessment and risk reduction
Safety of machinery – Safety-related parts of control systems
– Part 1: General principles for design
Safety of machinery – Safety-related parts of control systems
– Part 2: Validation
Safety of machinery. Emergency stop. Principles for design
Functional safety – Safety instrumented systems for the
process industry sector
Electrical equipment for measurement, control and laboratory
use – EMC requirements – Part 3-1: Immunity requirements for
safety-related systems and for equipment intended to
perform safety-related functions (functional safety) – General
industrial applications
European Machinery Directive
Machine-specific C-type standards
3ADW000508R0201+Q964 E-Stop cat.1 without opening mains contactor en b