Machine Positioning - OEM BM/2/AS Operating And Service Manual

BM/2/AS
Installation and connections
• Remove the rear panel (7) and fasten the two ma-
FIG. 3
chines with two screws (8), washers (9) and nut (10).
10
9
8
7
3.1.a - MACHINE POSITIONING
The machine shall be positioned according to the
FIG. 4
instructions reported in Fig 2, since they indicate the
minimum safety range to be considered in order to allow
the user or the technician to properly carry out any work
and/or maintenance operations.
300 mm
300 mm
300 mm
GB - 12