Ignition Timing Check and Adjustment
(7) Press the SET key (SW007). " " (Figure.31)
will be displayed. The LEVEL LED (LED053)
and TEST/WARNING LED (LED052) will be
illuminated.
(8) Press the UP (SW005) or DOWN (SW006) key,
to display " " (Figure.32). Press the
SET key (SW007) for one second or more. The
TEST/WARNING LED (LED052) will go out, and
distributor mode will be cancelled.
7. Stop test run
(1) Press the HOME key (SW004) for one second or
more.
Menu item number " " (Figure.33) will be
displayed.
(2) Press the UP (SW005) or DOWN (SW006) key, displaying the menu item numbers. Select menu item
" " in the (Figure.34.) The display " " (Figure.35) will appear.
(3) Press the SET key (SW007). " " (Figure.36)
will be displayed. The LEVEL LED (LED053)
and TEST/WARNING LED (LED052) will be
illuminated.
(4) Press the SET key (SW007) for one second or more.
The TEST/WARNING LED (LED052) will go out,
and the test run will be stopped.
8. Final check
(1) Running condition check
Make sure that no abnormal noise or vibration occurs.
Make sure that none of the attached parts are loose.
Figure.34
34
Figure.31
Figure.32
Figure.33
Figure.35
Figure.36