Ignition Timing Check and Adjustment
5. Correction for distorted amount
If the value is different than that displayed by " " (engine ignition timing) set in item ( ) above, select " ."
(ignition timing offset) in " " engine settings, and correct for the distorted amount.
(1) Press the HOME key (SW004) for one second or
more.
Menu item number " "(Figure.15) will be
displayed.
(2) Press the UP (SW005) or DOWN (SW006) key, displaying the menu item numbers. Select menu item
" " in the Figure.16. The display " " (Figure.17) will appear.
(3) In this state, press the SET key (SW007).
The display will change to " " (Figure.18)
and the LEVEL LED (LED053) will be illuminated.
(4) Next, press the UP (SW005) or DOWN (SW006) key, to display " " (ignition timing offset).
(Figure.18-1)
Figure.16
Figure.18-1
Figure.17
30
Figure.15
Figure.18