Table of Contents
Advertisement
Cautions for Safety
Do not install in a place with possible leak of
flammable gas.
Leaked flammable gas around the
refrigeration unit may catch fire
from a spark of a switch and lead
to fire.
Apply a drain work according to the need.
Without consideration of drain
water processing, moisture from
rainwater and defrosted water
generates mold and moss, and
may cause slipping on the floor.
Install in a place without air stagnation.
Leak of refrigerant gas may cause
insufficient oxygen and harm
human health.
● Install in a place with good
ventilation.
Always install an ground fault protector with
the specified capacity.
Incorrect capacity does not
operate safety stop function
and may lead to fire or electrical
shock.
Ground fault protector needs
to follow IEC60364-4-44
443,overvoltage category III.
(Impulse withstand voltage value
4kV.)
(Be sure to comply with the following)
CAUTION
Installation Work
Produce a refrigeration cycle within the
limits of an operation standard (Scope of
Application).
Apply heat insulation on the suction line and
liquid line.
Request a specialty operator for moving the
refrigeration unit.
Electrical Work
Do not include electrical wiring in the heat
insulation material.
EN - 6
Non-standard refrigeration cycle
may generate abnormal high
pressure and abnormal heat
generation, thereby causing burst,
smoke generation, fire and current
leak.
Lack of heat insulation generates
water from condensation and mold
and moss, thus causing slipping
on the floor.
Incorrect moving may cause falling
or dropping of the refrigeration
unit, and cause injury.
● Refrigeration unit is a heavy
item. Always consult with a
specialty operator.
Condensation of piping may
cause current leak and fire
caused by overheating.
Hide quick links:
Advertisement
Table of Contents
