Panasonic OCU-CR200VF5 Operating Instructions And Installation Instructions page 30

Setting and Indication
Switch Setting
(1) AUTO/FORCED switch (Slide switch, SW14)
SW14
AUTO
FORCED
(2) CONTROL/CHECK switch (Slide switch, SW15)
SW15
CONTROL
CHECK
(3) 8P DIP switch (SW13)
The following functions can be selected. Change setting as required.
Switch setting at factory shipment is No.2: ON, other (No.1, No.3~No.8) : OFF.
SW13
Function
Auto operation
Forced operation
Function
Normal Mode
Special Mode
Function with ON
No.
1 Evacuation
2
3
4
5
6
7 Back mode 2
8 Back mode 1
Remarks
Not yet used
Evacuation Mode
(DIP switch SW13 setting is also
Remarks
No.3, 4, 5, 6, 7, 8: OFF,
SW15: CHECK
Always ON
Always OFF
No.1, 3, 4, 5, 6, 8: OFF
No.1, 3, 4, 5, 6, 7: OFF
EN - 30
Remarks
required)