Table of Contents
Advertisement
Selection of Installation Location
Location not disturbing neighbors
Avoid air-blow from the gas cooler to the neighbor's window or noise to disturb other people.
Location with a sturdy and level surface
Install the refrigeration unit on a fi rm foundation to avoid an increase of noise and vibration. Particularly at the
boundary from the neighbor's lot, comply with the regional laws and regulations.
Location away from a heat source
Installation should not be affected by refl ection from the fl oor.
Location with good ventilation
To ensure good ventilation, installed location should ensure the intake air by the gas cooler is 43 °C or below with
good airfl ow.
Location not affected by a wet fl oor
Refrigeration unit is often affected by rainwater and drain water from defrosting. Apply drain water work as required.
Location not affected by snow accumulation
Installation in a cold weather location should avoid snow accumulation and attachment of frost or freezing by furnishing
a roof.
Direction for avoiding strong wind
Install the refrigeration unit with its blow-out side facing perpendicular to the wind direction.
Wind direction
Carry-in / Installation
Carry-in Operation
(1) Carry the refrigeration unit gently by keeping the vertical position as much
as possible.
(2) Absolutely avoid a lay-down position of the refrigeration unit.
(3) When carrying the refrigeration unit by a forklift, use a packaging wood
base or pallet for maintaining the refrigeration unit in the vertical position.
Wind direction
Wind
direction
EN - 14
Hide quick links:
Advertisement
Table of Contents
