Electrical Wiring Work - Panasonic OCU-CR200VF5 Operating Instructions And Installation Instructions

Electrical Wiring Work

Wiring Block Diagram Example
Caution
*1 : Use the cabtyre cable Power Line.
*2 : Use shielded cable for liquid tube electromagnetic valve line, showcase operation signal line and external Alarm
Line.
The shield Line connect the screw with FIL-EN-PCB earth line when the shield Line do not ground at the
connected equipment.
*3 : Use shielded twisted pair cable for communication line.
SW1
5P-2 5P-3
Communication Line
Shielded cable (*2)
(Red)
(White)
(Green)
(Black)
(Gray)
(Red)
(White)
(Green)
(Black)
(Gray)
Shielded cable (*2)
Liquid tube
Electromagnetic
Valve
Showcase
Operation
signal
Shielded cable (*2)
Showcase Operation signal
(Non-Voltage Contact)
No Use
User System
STP cable (Shielded Twisted Pair) (*3)
No Use
User System
STP cable (Shielded Twisted Pair) (*3)
EN - 24
User System
(External Alarm)
~50 Hz 220/230/240 V
Ground fault
protector
Power
source
Cabtyre cable (*1)
Coil for Liquid tube Electromagnetic Valve