Electrical Wiring Work
Wiring Guide Opening
Wiring guide opening is located at the front, back and right side surfaces. (Power supply holes of Ø 26 and Ø 38 are
furnished in three directions)
Use a cable bundling tie to eliminate wire
slack without touching the sheet metal.
When the panel attachment after work is incomplete, penetration of rainwater is possible. Securely
Caution
fasten the panels after work.
Always thread wires through
the rectangle hole furnished at
the bottom of the electrical box.
Cable bundling tie
STP cable (Shielded Twisted Pair)
Power line and communication line connect to Refrigeration Unit
through conduit .
EN - 25