Phonak SmartLink+ Frequently Asked Questions page 4

Question
Bluetooth
What is the Bluetooth specification used in SmartLink+?
Which Bluetooth devices can I connect to SmartLink+?
Can I pair SmartLink+ with several Bluetooth devices?
Can I connect SmartLink+ to several Bluetooth devices
simultaneously?
I cannot find the SmartLink+ via Bluetooth. What's the
problem?
I followed all the connection guidelines but still have no
Bluetooth connection. What should I do?
What is the maximum range possible between SmartLink+
my cellphone?
What is the passkey for SmartLink+ and is it possible to
personalize this code?
Can somebody else equipped with a Bluetooth cellphone
listen in on my phone conversation?
Frequently Asked Questions
SmartLink+, ZoomLink+, EasyLink+
Answer
SmartLink+ supports Bluetooth specification 2.0 with EDR
(enhanced data rate).
SmartLink+ can be connected to virtually all Bluetooth
devices, providing they offer one or more of the following
profiles:
HFP – Handsfree profile
HSP – Headset profile
A2DP – advanced audio distribution profile
Accessibility, connectivity and link quality may vary between
different Bluetooth devices.
Some Bluetooth devices only allow selected Bluetooth
companions. If you experience problems connecting
your device and SmartLink+, please contact the dealer of
your Bluetooth device (cellphone, MP3 etc.).
Yes, SmartLink+ can be paired with up to eight Bluetooth
devices. After pairing, you need to establish a connection
with a device. The number of active connections is limited
(see following question).
SmartLink+ cannot be connected to several cellphones or
other Bluetooth devices at the same time.
However, you can be connected to a cellphone via the HF/HS
profile and simultaneously connected to your Bluetooth MP3
player using the A2DP profile.
Make sure you have set your SmartLink+ to pairing mode
(pressing 5 seconds on the green telephone button). This
makes it identifiable over Bluetooth. Place the SmartLink+
close to the Bluetooth device.
Have your local phone dealer check its Bluetooth
functionality and ask for an update of the mobile phone's
operating system, if required.
SmartLink+ supports a transmission range of up to 10 m.
However, Bluetooth range is strongly affected by the local
situation and the phone used. To ensure hassle-free com-
munication, Phonak recommends not placing SmartLink+
and your cellphone more than 3 meters apart.
The default passkey is «0000» (four zeros). This code can
be changed by your audiologist or hearing clinic staff
using Phonak's FM SuccessWare.
No, SmartLink+ receives and transmits Bluetooth signals
only from and to devices to which it has been paired and
connected. Communications between your phone and
SmartLink+ are encoded and cannot be decoded by other
phones.